Advertisement
Tear off the camera glass and tape of the camera
connective cable, then use a Philips-head screwdriver
to remove 3pcs screws for unlocking the rear cover
S13
with front cover. Remove the rear cover, and then tear
off the conductive foam and tape for release the cable,
then tear off the camera from the front cover.
(No.1~3 screw size=M3x5, Torque=3
3
Use a Philips-head screwdriver to remove 21pcs
screws for unlocking the middle bezel unit with the
S14
panel module.
(No.1~21 screw size=M3x4, Torque=5
9
10
11
8
14
3
7
6
4. Disassembly and Assembly Procedures
0.5kgfxcm)
±
2
1
0.5kgfxcm)
±
15
12
16
1
17
13
4
20
18
2
19
5
Release the touch board from the middle bezel by
tearing off the tape, and then
S15
tearing off 3pcs tapes on the back of cable. Take
away the
middle bezel and put it on a cushion foam.
Put the middle bezel with LED board into a fixture,
S16
then tear off the mylar tape for releasing the LED
board.
Remove the Mylar tape from the brackets by tearing
S17
off the tape on the bracket.
lift up the LED cable by
Advertisement
