Carrier 40MPHA Service Manual page 57

Indoor Unit Sizes 18K-24K (Electrical Parts) (Anti-static gloves must be worn)
NOTE: Remove the front panel (refer to the front panel removal steps) before disassembling electrical parts.
P o r e c d u e r
1) Cut the ribbon with a shear, then pull
out the coil temperature sensor (T2).
2) Remove the fixing screw (1) on the
electronic control box and screws (2)
used for the ground connection.
3) Pull upwards until the electronic
control box cover is removed.
40MPHA-03SM
l l I s u r t t a o i n
Ribbon
Specifications subject to change without notice.
Ground Screws
T2 Sensor
57