Efi; Exit" Tab - Siemens SIMATIC IPC227G Operating Instructions Manual

2.7.1

"EFI"

List of boot media.
Calling "EFI"
Select: "Setup Utility (Page 11)" > "Boot" > "EFI".
• If "Add Boot Options" = "Auto", the boot media is grayed out and cannot be changed.
• If "Add Boot Options" = "First" or "Last", the following can be changed:
– Sequence of the boot media: <F6>, <F5> or <+>, <-> keys
– List of valid boot media: <Enter> button
2.8

"Exit" tab

Exit the Setup utility. You have the following options for saving or discarding the changes
you made:
Calling "Exit"
Choose: "Setup Utility (Page 11)" > "Exit".
Firmware setting
Exit Saving Changes
Save Change Without Exit
Exit Discarding Changes
Load Optimal Defaults
Load Custom Defaults
Save Custom Defaults
Discard Changes
Save setup settings to file
Load setup settings from file
Firmware/BIOS description SIMATIC IPC227G, IPC277G, IPC327G, IPC377G
Operating Instructions, 09/2021, A5E50059883-AB
Meaning
All changes are saved.
The device is restarted with the changed firmware settings.
All changes are saved.
Setup utility remains open.
Setup Utility is closed.
All changes are discarded.
The firmware settings are reset to the safe default values.
The delivery state is restored.
NOTICE:
All current firmware settings are overwritten.
The user-specific profile with the user-specific firmware settings is loaded.
Requirement:
The firmware settings were previously saved as user-specific profile with "Save
Custom Defaults".
NOTICE:
All current firmware settings are overwritten when loading the user-specific profile
with "Load Custom Defaults".
The current firmware settings are saved as a user-specific profile (see also "Load
Custom Defaults").
All changes to the firmware settings are discarded.
The current firmware settings are written to a file.
Firmware settings are loaded from a file.
Configure firmware
2.8 "Exit" tab
25