Gigaset E380 A Care User Manual page 26

Making calls
Making internal calls
Multiple handsets have been registered to the base station (
¤
Press briefly . . . the handset list is opened, this handset is indicated by <
to select handset or Call all (group call)
Fast access for group call:
¤
Press briefly
or press and hold
Internal calls to other handsets registered to the same base station are free of charge.
You hear the busy tone if:
•
there is already an internal connection
•
The handset being called is not available (deactivated, outside of range).
•
The internal call is not accepted within 3 minutes.
Internal consultation call / Internal transfer
Call an external participant and transfer the call to an internal participant or hold a consultation
call with him or her.
¤
. . . the list of handsets is opened
. . . the internal participant(s) are called . . . possible options:
Hold a consultation call:
¤
Speak to the internal participant
Return to the external call:
¤
Options
Transfer the external call when the internal participant has answered:
¤
Announce an external call
Transfer the external call before the internal participant answers:
¤
Press the End call key
internal participant does not answer or the line is busy, the external call will
automatically return to you.
End the internal call if the internal participant does not answer or the line is busy:
¤
End . . . You return to the external call
Establishing a conference call / Call swapping
Conduct a call while a second call is being held. Both callers are indicated on the display.
•
Call swapping:
•
Establish a three-way conference call:
•
End a conference call:
. . . use to swap between both participants
The other participants end the conference call using the End call key
26
End active call
Press the End call key
. . . the external call is forwarded immediately. If the
Use to swap between both participants.
End Conf. . . . You have been connected back to external participant
Press the Talk key
. . . use to select a handset or Call all
OK
Conf.
p. 81).
. . . use
OK
.