Gigaset E380 A Care User Manual page 109

Special settings for Internet telephony
Activating Call Forwarding for VoIP connections
The settings for Call Forwarding are on the web page:
¤
Settings Telephony
You can divert calls to your VoIP connections and to your Gigaset.net number.
You can divert calls to your VoIP connections to any external number (VoIP, fixed line network or
mobile number). Call Forwarding takes place via VoIP.
You can divert calls to your Gigaset.net number within the Gigaset.net, i. e. to another
Gigaset.net number.
Setting DTMF signalling for VoIP
You can change the settings for DTMF signalling in the DTMF over VoIP Connections area on the
web page:
¤
Settings Telephony
DTMF signalling is required, for example, for querying and controlling certain network
mailboxes via digit codes or for remote operation of a local answer machine.
To send DTMF signals via VoIP you must first define how key codes should be converted into and
sent as DTMF signals: as audible information via the speech channel or as an "SIP Info" message.
Ask your provider which type of DTMF transmission it supports.
You can configure your phone in such a way that it attempts with each call to set the most
suitable DTMF signalling for the current codec (Automatic).
Or you can explicitly define the type of DTMF signalling:
•
Audio or RFC 2833, if DTMF signals are to be transmitted acoustically (in voice packets).
•
SIP info, if DTMF signals are to be transmitted as code.
DTMF signals cannot be transmitted in the audio path (Audio) on broadband
connections (the G.722 codec is used).
Configuring call transfer via VoIP
You can change the settings for call transfer in the Call Transfer area on the web page:
¤
Settings Telephony
You can transfer an external call to a VoIP connection to a second external participant by
pressing the Recall key (depending on the provider).
Add/change settings for call transfer:
•
Activate call transfer by ending the call. The two external participants will be connected
when you press the End call key
•
Activate direct call transfer. The call can be transferred before the second participant has
answered.
•
Press the Recall key to deactivate call transfer if you want to assign a different feature to the
Recall key ( "Defining Recall key functions for VoIP (hook flash)").
Call Divert
Advanced VoIP Settings
Advanced VoIP Settings
.
Web configurator
109