Gigaset E380 A Care User Manual page 100

Internet telephony (VoIP)
Change default assignment
•
Using the installation wizard for initial installation (
or
•
Using the Web configurator on a PC: Page
( see Web configurator)
or
•
Via the handset menu
¤
. . . Use
Connections/Rec. Connections
The process is the same as for the installation wizard (
Internet call settings in Web configurator
Register with Web configurator (
•
When making fixed line network calls, you must always dial the area code, even for local calls
(depending on your provider):
¤
Settings Management
via VoIP option
•
Establish a connection automatically via the fixed line network if a call attempt via an
IP connection fails:
¤
Settings Telephony
the Automatic fallback to fixed line option if a fixed line connection is available
•
Define a dialling plan:
¤
Settings Telephony
If a dialling plan has been defined for the dialled number, then the connection specified in
the dialling plan will be used instead of the send connection. If the number is blocked by a
dialling plan, Not possible is displayed.
•
Further settings: DTMF signalling, call transfer, assignment of the Recall key, communication
ports
¤
Settings Telephony
100
to select Settings
OK
see Web configurator)
Local Settings
Number Assignment
Dialling Plans
Advanced VoIP Settings
see Set-up)
Settings Telephony
OK Telephony
see Set-up).
activate Use Area Code Numbers for Calls
. . . in Alternative Connection activate
Number Assignment
OK Send