Introduction
The EM3296 V4 includes an aiming LED and two illumination LEDs.
LED Compliance Statement
The EM3296 V4 complies with IEC 62471:2006 for LED safety.
The EM3296 V4 contains:
•
a CMOS image sensor and its lens
•
two Red LEDs based illumination system
•
a red LED aiming system
Figure 1-1 System Block Diagram
In-line
CMOS
(E5)
The EM3296 V4 can be connected to a host device via its 12-pin FPC/FFC connector. For more information about this
connector, please see Chapter 3.
3
Chapter 1 Getting Started
FPC Cable
30-pin
24-pin
Connector
Connector
Illumination LED Land
In-line
30-pin
Connector
Mainboard
Decoding
MCU
Chip
Illumination Control
Aiming Control
Soldered Dot
Aiming LED Board
12-pin
Connector