Table of Contents
Advertisement
※ 3 Pulse trigger: When the trigger is pulled and released (pulse width : 50ms), scanning is activated until a barcode is
decoded or the decode session timeout expires. The duration can be programmed. To learn how to program the
parameter, please see the EM3296 V4 user guide.
For the external trigger circuit, please see the "Trigger Circuit" section in Chapter 5.
Connector Specifications
The EM3296 V4 is equipped with a 12-pin FPC connector. The connector is supplied by Hirose Electric Co.Ltd, Model No.:
FH34SRJ-12S-0.5SH(50). For more information about the connector, please visit https://www.hirose.com/.
Note:
1.
It is recommended not to press the cover and keep it upright before the FFC/FPC cable is not inserted.
2.
Keep the FFC/FPC cable in the right place during connection.
15
Figure 3-2
Advertisement
Table of Contents
