Fortinet FortiFone FON-C70 User Manual page 34

The Start REC softkey is not available when:
• there are no connected calls on your phone
• you place a new call
• the phone prompts you to answer an incoming call.
The recording is not paused when the following occurs:
• you place a call on hold
• you mute a call
• you set up a conference call
• you perform the attended or semi-attended transfer
• an incoming call arrives on your phone.
To record a call:
1. Press the More softkey, then press the Start REC softkey during a call.
The LCD screen prompts the approximate time remaining (depending on the free space of
the USB flash drive), and displays
If you press the Hold softkey while recording, only you are recorded. If you press
recording, only the callee is recorded.
If there is insufficient free space (less than 1 hour) on the USB flash drive during recording,
the LCD screen will display a warning.
2. Press the OK softkey to return to the previous screen.
If there is insufficient free space (less than 2 minutes) on the USB flash drive when you press
the Start REC softkey, recording is not started, and the LCD screen will display a warning.
If there is insufficient free space (less than 2 minutes) on the USB flash drive during
recording, recording is automatically stopped, and the LCD screen will display a warning.
You can hold, transfer or set up a conference call while recording.
When you end a call while recording, the recording will be stopped and saved to the USB flash
drive automatically.
To stop recording while the phone records, press the More softkey then press the Stop REC
softkey.
The LCD screen prompts Record file saved.
The recording will be stored as a new .wav file on the USB flash drive when the phone starts
recording again.
Configuration Overview
and recording duration.
Page 28
while
FortiFone User Guide