Call Completion; Call Log Setting - Fortinet FortiFone FON-C70 User Manual

Intercom Feature
Intercom Tone
Intercom Barge
To configure intercom features via phone user interface:
1. Press Menu > Features > Intercom.
2. Make the desired changes.
3. Press the Save softkey to accept the change or the Back softkey to cancel.
These specific parameters are configurable via web user interface at the path Features >
Intercom.

Call Completion

Notify a caller that a called party is available to receive a call, after a previous attempt had failed.
To configure call completion via phone user interface:
1. Press Menu > Features > Call Completion.
2. Press the
3. Press the Save softkey to accept the change or the Back softkey to cancel.
Call completion is configurable via web user interface at the path Features > General
Information.
To use call completion:
1. When the called party is busy, the caller will be prompted to wait for the called party.
2. Press the OK softkey, the phone returns to the idle screen and call completion is activated.
3. When the called party becomes idle, the caller will be prompted to dial the called party
again.
4. Press the OK softkey to redial the number.

Call Log Setting

You can enable/disable the FON-C70 ability to keep a record of Missed Calls and Placed Calls
through this setting. By default this setting is enabled.
To change the option for Call Log Record:
1. Press Menu > Features > Call Log Setting.
2. Press the
Configuration Overview
Description
Enable or disable a tone played when an intercom call is received.
Enable or disable the IP phone to automatically answer an incoming
intercom call while there is already an active call on the phone.
or softkey to select Enabled from the Call Completion field.
or softkey to select Enabled or Disabled.
Page 17 FortiFone User Guide