Change Pin; Advanced Settings; Account - Fortinet FortiFone FON-C70 User Manual

To select a ring tone for the account via phone user interface:
1. Press Menu > Settings > Basic Settings > Sound > Ring Tones.
2. Press
3. Press
the ring tone selected for the phone.
4. Press the Save softkey to accept the change or the Back softkey to cancel.
A ring tone for the account is configurable via web user interface at the path Account > Basic >
Ring Type.
Key Tone
You can enable or disable a tone being heard when dialing on the FON-C70.
To change the Key Tone setting via phone user interface:
1. Press Menu > Settings > Basic Settings > Sound > Key Tone.
2. Press the
3. Press the Save softkey to accept the change or the Back softkey to cancel.

Change PIN

The FON-C70 has a feature to lock the phone (see Phone Lock under the Advanced Settings),
which requires a PIN to unlock the phone. This setting allows the user of the phone to
customize the PIN for the Phone Lock feature.
To change the Phone Lock PIN via phone user interface:
1. Press Menu > Settings > Basic Settings > Change PIN.
2. Enter the desired value in the Current PIN, New PIN and Confirm PIN fields respectively.
3. Press the Save softkey to accept the setting or the Back softkey to cancel.
The unlock PIN length must be within 15 digits.

Advanced settings

Account

The Accounts section contains parameters to allow the phone to register to a SIP server or
PBX. Contact your administrator before proceeding.
You can register only one account on the FON-C70 IP conference phone.
To register an account via phone user interface:
1. Press Menu > Settings > Advanced Settings (Default password: 23646) > Account.
2. Press the Enter softkey.
3. Press the
4. Enter the desired value in Label, Display Name, Register Name, User Name, Password and
SIP Server1/2 fields respectively.
If you use the outbound proxy servers, do the following:
5. Press the
Configuration Overview
or to select the desired account, then press the Enter softkey.
or to select the desired ring tone. If Common is selected, this account will use
or softkey to select Enable or Disable.
or softkey to select Enabled from the Account Status field.
or softkey to select Enabled from the Outbound Status field.
Page 20 FortiFone User Guide