Table of Contents
Advertisement
Auto Provision
The FON-C70 can be set to obtain configuration files through auto provisioning via
FTP/TFTP/HTTP/HTTPS.
To configure auto provisioning via the phone user interface:
1. Press Menu > Settings > Advanced Settings (Default password: 23646) > Auto Provision.
2. Enter the URL of the auto provisioning server. Press
Enable field.
3. Press
4. Press
5. Press the Save softkey.
Reboot the phone to start the auto provisioning process.
FWD International
This setting allows an international number to be set under Menu > Features > Call Forwarding.
Press the
Messages
The Messages section is where you can check Voice Mail and Text Messages.
Voice mail
When receiving a new voice mail, the LCD screen will prompt n New Voice Mail(s) (n indicates
the number of unread voice messages, e.g., 89 New Voice Mail(s)) and display
To listen to voice mail:
1. When the LCD screen prompts that the phone receives a new voice mail, you can press the
Connect softkey to dial out the voice mail access code.
2. Follow the voice prompt to listen to your voice mail.
To view the voice mail via phone user interface:
1. Press Menu > Message > Voice Mail > View Voice Mail. The LCD screen displays the
amount of new and old voice mails.
2. Press the Connect softkey to listen to voice mail.
When using the FON-C70 outside of the FortiVoice, the Voice Mail access code can be
programmed by following these steps:
1. Press Menu > Message > Voice Mail > Set Voice Mail.
2. Press the 123 softkey to select the proper input mode and then enter the voice mail access
code (e.g., *88).
3. Press the Save softkey to accept the change or the Back softkey to cancel.
Configuration Overview
to enter the User Name.
to enter the Password.
or
softkey to select Enabled or Disabled.
Page 24
to select Enabled from the Lock
.
FortiFone User Guide
Advertisement
Table of Contents
