Call Waiting; Auto Answer - Fortinet FortiFone FON-C70 User Manual

b. If you select Busy Forward:
c. If you select No Answer Forward:
4. Press the Save softkey to accept the change or the Back softkey to cancel.
screen indicates that the call forward is enabled.
Call forward is configurable via web user interface at the path Features > Forward & DND.

Call Waiting

You can enable or disable call waiting on the phone. If call waiting is enabled, you can receive
another call while there is already an active call on the phone. Otherwise, another incoming call
is automatically rejected by the phone with a busy message. You can also enable or disable the
phone to play a warning tone when receiving another call.
To configure call waiting via phone user interface:
1. Press Menu > Features > Call Waiting.
2. Press the
3. Press the
4. (Optional) Enter the call waiting on code or off code respectively in the On Code or Off Code
field.
5. Press the Save softkey to accept the change or the Back softkey to cancel.
Call waiting is configurable via web user interface at the path Features > General Information.

Auto Answer

You can enable auto answer to automatically answer an incoming call. You can also enable auto
answer mute to mute the local microphone when an incoming call is answered automatically.
You can automatically answer multiple incoming calls. You can also mute multiple automatically
answered calls.
To configure auto answer and auto answer mute via phone user interface:
1. Press Menu > Features > Auto Answer.
2. Press the
3. Press the
4. Press the Save softkey to accept the change or the Back softkey to cancel.
on the LCD screen.
Auto answer is configurable via web user interface at the path Account > Basic.
Configuration Overview
iii. (Optional) Enter the always forward on code or off code respectively in the On Code
or Off Code field.
i. Press the or softkey to select Enable from the Busy Forward field.
ii. Enter the destination number you want to forward all incoming calls to when the
phone is busy in the Forward to field.
iii. (Optional) Enter the busy forward on code or off code respectively in the On Code or
Off Code field.
i. Press the or softkey to select Enable from the No Answer Forward field.
ii. Enter the destination number you want to forward all unanswered incoming calls to in
the Forward to field.
iii. Press the or softkey to select the ring time to wait before forwarding from the
After Ring Time field. The default ring time is 12 seconds.
iv. (Optional) Enter the no answer forward on code or off code respectively in the On
Code or Off Code field.
or softkey to select Enable from the Call Waiting field.
or softkey to select Enable from the Play Tone field.
or softkey to select Enable from the Auto Answer field.
or softkey to select Enable from the Auto Answer Mute field.
Page 13
on the idle
appears
FortiFone User Guide