Installing The Communications Cable - Huawei SUN2000 Series User Manual

SUN2000-(196KTL-H0, 200KTL-H2, 215KTL-H0)
Series
User Manual
During DC input power cabling, leave at least 50 mm of slack. The axial tension
on PV connectors must not exceed 80 N. Radial stress or torque must not be
generated on PV connectors.
Figure 5-15 DC input power cabling requirement
----End

5.8 Installing the Communications Cable

Precautions
When routing communications cables, separate communications cables from
power cables to prevent communication from being affected.
Issue 07 (2021-07-08)
NO TICE
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
46