Support-Mounted Installation - Huawei SUN2000 Series User Manual

SUN2000-(196KTL-H0, 200KTL-H2, 215KTL-H0)
Series
User Manual
Figure 4-7 Mounting bracket dimensions
Before installing the mounting bracket, remove the security torx wrench from the
mounting bracket and set it aside.
Figure 4-8 Removing a security torx wrench

4.4.1 Support-mounted Installation

Support-mounted Installation
Step 1 Install the mounting bracket.
Issue 07 (2021-07-08)
NO TE
The inverter mounting bracket has four groups of tapped holes, each group containing four
tapped holes. Mark any hole in each group based on site requirements and mark four holes
in total. The two round holes are recommended.
Copyright © Huawei Technologies Co., Ltd.
4 Installation
25