Operation - HAMPTON BAY HAVANA 48-HVA Use And Care Manual

Assembly - Assembling the Fan Without the Light Kit
12
Assembling the fan without the
light kit
□
In order to use the fan without the light kit, remove the switch
cup (L) from the top of the light kit fitter assembly by removing
the center hex nut inside the switch cup (L).
□
Thread the switch cup (L) off of the threaded nipple on the top
of the light kit fitter assembly.
□
Remove the four screws (OO).
□
Press the plastic plug (EE) into the center hole of the switch
cup (L).
□
Align the four screw holes in the switch cup (L) with the four
screw holes in the switch cup cover.
□
Position the switch cup (L) onto the black bracket and install
the screws (00) that were removed in the first step.
Operating Your Fan
The pull chain controls the fan speed as follows:
1 pull - High, 2 pulls - Medium, 3 pulls - Low, and 4 pulls - Off
Speed settings for warm or cool weather depend on factors such as
room size, ceiling height, number of fans, and so on.
NOTE: Wait for the fan to stop before reversing the direction of the blade
rotation.
The slide switch controls the direction: forward (switch left) or reverse
(switch right).
Warm weather - (Forward) A downward airflow creates a cooling effect.
This allows you to set your air conditioner on a higher setting without
affecting your comfort.
Cool weather - (Reverse) An upward airflow moves warm air off of the
ceiling. This allows you to set your heating unit on a lower setting
without affecting your comfort.
12
OO
L
EE