Panasonic CS-HZ25WKE Service Manual page 86

Press TEMP increment or decrement button to choose No. 12.
o
Press Timer increment or decrement button to select desired temperature low limit of set temperature for
o
AUTO mode.
Press Timer Set button to confirm low limit selection.
o
Press TEMP increment or decrement button to choose No. 13.
o
Press Timer decrement or increment button to select desired temperature high limit of set temperature for
o
AUTO mode.
Press Timer Set button to confirm high limit selection.
o
LCD returns to original display if remote control does not operate for 30 seconds or press Timer Cancel
o
button.
Normal display mode
Press SW to enter customer zone &
Press
i) Display latest set temp (Low3).
ii) After reset, Low3 = 16°C (by default)
Use SW or
Range = 16°C ~ [High3]
Press SW to comfirm selection
Memorize new
Low3 range
Normal display mode
Press SW to enter customer zone &
Press SW's to choose function 13
i) Display latest set temp (High3).
ii) After reset, High3 = 30°C (by default)
Use SW or
Range = [Low3] ~ 30°C
Press SW to comfirm selection
Memorize new
No code transmission
High3 range
SW's to choose function 12
SW to change Low3 range
No code transmission
SW to change High3 range
86