Wireless Lan Control - Panasonic CS-HZ25WKE Service Manual

Hide thumbs Also See for CS-HZ25WKE:
Table of Contents

Advertisement

14.13 Wireless LAN Control

14.13.1 System Overview.
Indoor Unit
Network
Adaptor
Requires the APP to work with a smartphone with Android 5.0 and above, or iOS 9 and above.
However, there is no guarantee that the APP will work well with all Android OS version.
The Network Adaptor is designed specifically as a terminal for Panasonic Comfort Cloud app.
The Wireless LAN network coverage must reach the air conditioner installation location.
Specification
Network Adaptor
Model
Input Voltage
Current Consumption
Wireless LAN standard
Frequency range
Encryption
Precaution
Do NOT disassemble or alter this Network Adaptor in any way.
Do NOT remove this Network Adaptor from the appliance product's during operations.
Data transmitted and received over radio waves may be intercepted and monitored.
Usage precautions
Before using this product, be sure to read all the precautions in this manual for proper use. The Company is not
liable for any defects and damages, unless legal liability is recognized, in regards to failures, incurred by use of
this product that occur through incorrect use or during use by yourself or a third party.
Security Measure
Wireless LAN uses radio waves to exchange information. Therefore, there is a risk of unauthorized access.
Initialize the APP settings on the product prior to disposal or transferring to a third party.
Before setting
Confirm the wireless router is connected to the network correctly.
Confirm the Wireless LAN of the smartphone is activated.
Smartphone and air conditioner should be connected to the same wireless router.
14.13.2 Connecting Network
Before attempting to connect to the network, ensure the modem or wireless router is working and properly connected
to allow internet access.
Press
at the remote control to communicate with the home wireless LAN access point.
Wireless LAN LED
Fast blink
The unit is establishing the connection.
Slow blink
The unit is not securing the connection.
No blink (stays on)
The unit has established the connection.
It can establish the connection to the unit even If the unit is turned OFF.
Items you need to prepare
(purchase and subscribe separately)
Internet
Router
Smartphone
Wireless LAN Module (built-in)
DNSK-P11
DC 5V (From Air Conditioner Indoor Unit)
Tx/Rx max. 290/100 mA
IEEE 802.11 b/g/n
2.4 GHz band
WPA2-PSK (TKIP/AES)
from the indoor unit blinks to indicate the connection status to home access point.
Download from app store
Panasonic
Panasonic Comfort Cloud
app (free)
74

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cs-hz35wkeCs-hz25wke-5Cu-hz25wkeCu-hz35wkeCu-hz25wke-5

Table of Contents