Panasonic CS-HZ25WKE Service Manual page 142

Enter the password of the selected wireless router and continue.
2
When connection of air conditioner to router is successful, the Wireless LAN LED will
3
changed from blinking to ON. If the Wireless LAN LED is ON, connect the smartphone to
wireless router. (return to this application after completing the wireless network settings to
continue the setup)
• If the Wireless LAN LED keep blinking, check the wireless router connection.
When the connection of air‐conditioner to router
is successful, the Wireless LAN LED changes from
blinking to ON.
*It may take up to few minutes before changes
to ON.
* Wireless LAN LED'S position and colour varies
for different models.
If the Wireless LAN LED is ON, tap "Next"
If Wireless LAN LED keep blinking, tap "Check".
ConnectionGuide Connectio nGuide
Step 1 Step 1
Step 2 Step 2
If Wireless LAN LED is OFF during the connec on f Wireless LAN LED is OFF during the connec on
setup, please enable again by pressing "Wireless setup, please enable again by pressing "Wireless
LAN" bu on once before proceeding to step 1. LAN" bu n o n o e c e b o f e r r p c o
1. Press and hold "Wireless LAN" bu on for 5 1. Press and hold "Wireless LAN" bu on for 5
secsun l easy se ng "1" is shown. secsun l easy se ng "1" is shown.
2. Press "up" o r "down" bu on un l Advance 2. Press "up"or "down"bu on un Advance
se ng "2" is shown. se ng "2" is shown.
3. Point remote control to air‐condi oner and 3. Point remote control to air‐condi oner and Enter the password of the
press "SET" bu on once. press "SET" bu on once.
selected wireless router.
4. A er step 1 ~ 3 have been done, tap"Next". 4. A er step 1 ~ 3 have been done, tap"Next".
SSID:Router_SSID1
MAC address of target device
Cancel Cancel
SE T S E T
CAN CE L CANCE L
Next Next
Cancel Cancel
Connection Guide
Step 1 Step 3
Step 2
.
N e t x
Check
Cancel
Connection Guide
Step 1 Step 2
Searching for air‐conditioner.
Please wait...
Cancel
Step 3 Step 3
e e i d g n o t t s p e . 1
d8‐61‐62‐f8‐e6‐67
OK
Connection Guide Connection Guide
Step 1 Step 1 Step 3 Step 3
Step 2 Step 2
When the connec on of air‐condi oner to router When the con nec on of air‐condi oner to router
is successful, the Wireless LANLEDchanges from is successful, the Wireless LAN LEDchanges from
bli n king to ON. blinking to ON.
*It may take up to few minutes before changesto *It may take up to few minutes before chan gesto
ON. ON.
"Comfort Cloud" Wants
to Join Wi‐FI Network
"SSID: Router_SSID1"?
* *
Cancel Join
If the Wireless LAN LED is ON, tap "Next". If the Wireless LAN LED is ON, tap "Next".
Next N e t x
If Wireless LAN LED keep blinking, tap "Check". If Wireless LAN LEDkeep blinking, tap "Check".
Check Check
Cancel Cancel
Step 3
142