Toshiba RAC-PD1011CRU User Manual page 12

Window Installation Kit
Exhaust hose
Unit Window slider
adaptor
Hook
Hole Seat
Adaptor Lower
groove
Window slider A
Windows Type
Window
slider A
Hung Window
Page 12
Exhaust hose
assembly
adaptor
Make sure the adaptor
is inserted into the
lower groove of the
air outlet.
Bolt
Window slider B
Window
slider A
Sliding Window
Step One: Preparing the exhaust hose
assembly
Press the exhaust hose into the window slider
adaptor and unit adaptor, clamp automatically
by elastic buckles of the adaptors.
Step Two: Install the exhaust hose
assembly to the unit
Insert unit adaptor of the Exhaust hose assembly
into the lower groove of the air outlet of the
unit with the hook of the adaptor aligned with
the hole seat of the air outlet and slide down
the Exhaust hose assembly along the direction
indicated by the arrow for installation.
Step Three: Preparing the adjustable
window slider
1. Depending on the size of your window,
adjust the size of the window slider.
2. If the length of the window requires two
window sliders, use the bolt to fasten the
window sliders once they are adjusted to
the proper length.
User Manual