Chevrolet 1998 Prizm Owner's Manual page 19

Rear Head Restraint Removal
To remove the rear head restraints:
1. Press the release button located under the left side
of the head restraint.
2. Lift the head restraint upward.
3. Secure the head restraints in the
trunk
using the
tie-down straps located on each side of the
trunk floor.
To reinstall the rear head restraints:
1. Remove the head restraints from the trunk.
2. Press and hold the release button on the seat back
while inserting the head restraint.
3. Push the head restraint down. After releasing
the button, pull on the head restraint to make sure
it is secure.
Rear Folding Seatback (If Equipped)
You can fold either side of the seatback down in your
vehicle for more cargo space. On vehicles with
a
built-in
child restraint system, only the driver's side rear
passenger seatback can be folded down. Make sure the
front seat isn't reclined. If it is, the rear seatback won't
fold down all the way.
A safety belt that is twisted or not properly
attached won't provide the protection needed
in a crash. A person wearing a twisted or not
properly attached belt could be seriously injured.
After raising the rear seatback, always check to
be sure that the safety belt is not twisted and is
properly attached.
1-5