Chevrolet 1998 Prizm Owner's Manual page 144

While the tape is playing, use the VOLUME, FADE,
BAL, TREB, BASS and TONE controls just as you do
for the radio. The display will show an arrow to show
which side of the tape is playing. When the down
indicator arrow is lit, selections listed on the bottom
side of the cassette are playing. When the up arrow is
lit, selections listed on the top side of the cassette
are playing.
REV (TUNE): Press the left arrows to reverse the tape
rapidly. Press REV (TUNE) or TAPE to return to
playing speed.
FWD
(TUNE):
Press the right arrows to advance
rapidly to another part of the tape. Press FWD (TUNE)
or
TAPE to return to playing speed.
PREV (SEEK):. Press the left arrow to go to the start of
the current selection if more than eight seconds have
played. If you hold the button or press it more than once,
the player will continue moving back through the tape.
Press the left arrow or TAPE to return to playing speed.
NEXT (SEEK):
Press the right arrow to go to the start
of the next selection if more than eight seconds have
played. If
you
hold the button or press it more than
once, the player will continue moving forward through
the tape. Press the right arrow or TAPE to return to
playing speed.
00
(2): Press this button to reduce background noise
from tapes encoded with Dolby NR.
Dolby Noise Reduction is manufactured under a license
from Dolby Laboratories Licensing Corporation. Dolby
and the double-D symbol are trademarks of Dolby
Laboratories Licensing Corporation.
MTL: Your bias is set automatically. MTL will appear
on your display when a metal or chrome tape is inserted.
AM-FM: Press this button to play the radio when a
tape is playing.
3-10