Table of Contents
Advertisement
3.3 Inflating
IMPORTANT: Inflate your kayak in the following order. Failure to follow these instructions
may cause damage to your kayak. Do not over inflate. When fully inflated, the width of the
seating area should be between 15" to 16" at the widest point.
1. Inflate chamber 1 "main" until the kayak feels firm to the touch. Never over-inflate!
2. Inflate chamber 2 "floor" (using appropriate fitting) until firm (1.0 psi ONLY).
3. Make sure all valves are closed tightly and properly.
3.4 Over Inflation
CAUTION: Water temperature and weather will affect the air pressure of the kayak. In cold
weather and water your kayak will lose some pressure. If this occurs, you may want to add a
bit more air to the kayak to improve performance. In hot weather or prolonged sunlight, the air
inside the kayak will expand. You must let some air out of the appropriate chambers to prevent
the kayak from failing due to overpressure. You should avoid exposing your kayak to extreme
temperatures (hot or cold).
3.5 Deflation
1. Remove the cap from chamber 1.
2. Push stem inward and rotate to deflate position.
3. Twist the valve body open on chamber 2.
4. Once the chambers are deflated you can use your pump to vacuum out any additional air for
improve folding.
Diagram of Inflation Chambers
FireFly™ Inflatable Kayak Owner's Manual
Advertisement
Table of Contents
