GE GEP User Manual page 21

Technical Data GEP30-L-10
PV String Input Data
Max. DC Input Power (W) 39000
Max. DC Input Voltage (V) 800
MPPT Range (V) 200~650
Start-up Voltage (V) 180
Nominal DC Input Voltage (V) 370
PV Input Operating Voltage range（V） 180~800
Max. Inverter Backfeed Current To The array (A) 0
Max. Input Current (A) 26/26/26/26/26
Max. Short Current (A) 33/33/33/33/33
No. of MPP Trackers 5
No. of Input Strings per Tracker 2/2/2/2/2
AC Output Data
Nominal Output Power (W) 30000
Max. Output Power (W) 30000
Max. Output Apparent Power (VA) [1] 30000
Nominal Output Voltage (V) 220, 3L/N/PE or 3L/PE
Nominal Output Frequency (Hz) 50/60
Max. Output Current (A) 80
Output Power Factor
Output THDi (@Nominal Output) <3%
Current（inrush） 50
Maximum Output Fault Current 300
Maximum Output Over Current Protection (A) 195
Efficiency
Max. Efficiency 98%
Europen Efficiency 97.7%
Protection
Anti-islanding Protection
Input Reverse Polarity Protection
PV String Current Monitoring
Anti-PID Function for Module
DC Surge Protection
AC Surge Protection
Residual Current Monitoring Unit
Output Over Current Protection
Output Short Protection
Output Over Voltage Protection
Protective Class
Decisive Voltage Classification（DVC)
General Data
Operating Temperature Range (℃)
Relative Humidity
Operating Altitude (m）
Cooling
User Interface
Communication
RS485, WiFi, USB, PLC (Optional）
Weight (kg)
Size (Width*Height*Depth mm）
Protection Degree
Night Self Consumption (W)
Topology
Certifications & Standards
Grid Regulation IEC61727, IEC62116
Safety Regulation
EMC
*1：For Brazil Max. Output Power GEP50-10 is 50000W, GEP60-10 is 60000W.
*2：For Brazil Max. Output Apparent Power GEP50-10 is 50000W, GEP60-10 is 60000W.
*3：For Brazil Nominal Output Voltage GEP50-10 is 380V, GEP60-10 is 380V.
*4：For Brazil Communication GEP50-10 is RS485, WiFi, USB, PLC (Optional); GEP60-10 is RS485,WiFi,USB,PLC (Optional).
37
GEP35-L-10 GEP50-10
45500 75000
800 1100
200~650 200~950
180 180
370 600
180~800 180~1100
0 0
26/26/26/26/26/26 26/26/26/26/26 26/26/26/26/26/26
33/33/33/33/33/33 33/33/33/33/33 33/33/33/33/33/33
6 5
2/2/2/2/2/2 2/2/2/2/2
35000 50000
35000 55000 *1
35000 55000
*2
220, 3L/N/PE or 3L/PE 400 *3 , 3L/N/PE or 3L/PE 400 *3
50/60 50/60
96 80
~1 (Adjustable from 0.8 leading to 0.8 lagging)
<3% <3%
50 50
300 300
195 195
98% 98.3%
97.7% 98%
Integrated
Integrated
Integrated
Optional
Type II(Type I optional)
Type II
Integrated
Integrated
Integrated
Integrated
Class I
C
-30~60
0~100%
≤3000
Fan Cooling
LCD & LED or APP & LED
RS485, WiFi *4 , PLC (Optional)
55
520*660*220
IP65
<1
Transformerless
IEC61727, IEC62116, AS4777.2
IEC62109-1&2
EN61000-6-1,EN61000-6-2,EN61000-6-3,EN61000-6-4
Note：
GEP60-10
Overvoltage Category Definition
90000
Category I: applies to equipment connected to a circuit where measures have been taken to
1100
200~950
reduce transient overvoltage to a low level.
180
600
Category II: applies to equipment not permanently connected to the installation. For example,
180~1100
appliances, portable tools and other plug-connected equipment;
0
Category III: applies to fixed downstream equipment, including the main distribution board. For
6 example,switchgear and other equipment in an industrial installation;
2/2/2/2/2/2
Category IV: applies to equipment permanently connected at the origin of an installation
60000
(upstream of the main distribution board).For example, electricity meters, primary
66000 *1
overcurrent protection equipment and other equipment connected directly to
66000
*2
, 3L/N/PE or 3L/PE
outdoor open lines.
50/60
96
Moisture Location Category Definition
<3%
50
Moisture parameters
300
195
Temperature Range
Humidity Range
98.3%
98%
Environment Category Definition
Outdoor : the ambient air temperature is -20~50℃. Relative humidity range is from 4% to 100%,
applied to PD3.
Indoor unconditioned: the ambient air temperature is -20~50 ℃. Relative humidity range is from
5% to 95%, applied to PD3.
Indoor conditioned: the ambient air temperature is 0~40 ℃. Relative humidity range is from 5% to
85%, applied to PD2.
Pollution Degree Definition
Pollution degree 1: No pollution or only dry, non-conductive pollution occurs. The pollution has
Pollution degree 2: Normally only non-conductive pollution occurs. However, a temporary
Pollution degree 3: Conductive pollution occurs. Or dry, non-conductive pollution becomes
Pollution degree 4: Persistent conductive pollution occurs. For example, the pollution cause by
Level
3K3 4K2
0~+40℃ -33~+40℃
5%～85% 15%～100%
no influence.
conductivity occasionally caused by condensation must be expected.
conductive due to condensation, which is expected.
conductive dust, rain and snow.
4K4H
-20~+55℃
4%～100%
38