Precaution For Initial Startup; Special Adjustable Setpoints - GE GEP User Manual

5.3.3 History Information
The history information mainly includes the information of the generating capacity of the equip-
ment, the power generation information mainly includes the amount of electricity generation, daily
power generation, monthly power generation and annual power generation information.
WiFi
Hour
36kWh
1.0
0.8
0.6
0.4
0.2
0
4 6
01/01/2020 00:00:00
5.3.4 Wi-Fi Reset & Wi-Fi Reload
Configuration Communication
WiFi WiFi
22
Language Modbud Address
Data&Time WiFi Set
Communication
Country Code
Grid Connection
01/01/2020 00:00:00 01/01/2020 00:00:00
Fault
Please press the "Enter" over 3 seconds to save the setting.

5.4 Precaution For Initial Startup

1. Make sure the AC circuit is connected and AC breaker is turned off.
2. Make sure the DC cable between inverter and PV string is connected, and the PV voltage is
normal.
3. Turn on the DC switch, and set safety according to the local regulation.
4. Turn on the AC breaker, and check the inverter work normal.
29
History Info
22
Day Month Year
2020-01-01
8 10 12 14 16 18 20
Fault
WiFi Set
WiFi
22
WiFi Reset WiFi Reload
01/01/2020 00:00:00
Fault

5.5 Special Adjustable Setpoints

The inverter has a field in which the user can set functions, such as trip points, trip times, recon-
nect times, active and inactive QU curves and PU curves. It is adjustable through special software.
If needed, please contact after-sales. To obtain software manuals, you can download them from
the official website or contact after-sales.
5.5.1 PF Power Curve Mode
PF power curve mode can be modified by Modbus communication method, specifically according
to the machine Modbus address and Modbus register value, according to the set range to set the
corresponding value.
22
Function
PF curve mode enable or disable
Fault
B power factor
C power factor
5.5.2 PU Curve Mode
The PU curve mode can be modified by Modbus communication method, specifically according
to the machine Modbus address and Modbus register value, according to the set range to set the
corresponding value.
100%
80%
60%
40%
20%
0%
200
Example curve for a volt-watt response mode (Australia)
cosФ
0.95
B
1.0
A
0.95
LEGEND:
cosФ
PF Power Curve Mode
Default value (Australia) Default value (New Zealand)
0 0
50 (50%) 50 (50%)
90 (90%) 90 (90%)
V1 V2 V3 V4
210 220 230 240 250 260 270
Power, (%P/P )
rated
C
Setting range Register
"0"or"1" 40600
30~80 40603
90~100 40606
V1 V2 V3 V4
100%
80%
60%
40%
20%
0%
200 210 220 230 240 250 260 270
Example curve for a volt-watt response mode (New Zealand)
30