Chevrolet 1994 Cavalier Owner's Manual page 169

Table of Contents

Advertisement

Service
&
Appearance Care
2.2L L4: Checking Automatic
Transaxle Fluid
3.1 L
V6: Checking Automatic
Transaxle Fluid
.
168
How to Add fluid
Refer to the Maintenance Schedule to
determine what kind of transaxle fluid
to use. See
Recommended Fluids and
Lubricants in the Index.
If the fluid level is low, add only enough
of the proper fluid to bring the level into
the cross-hatched area on the dipstick.
1.
Pull out the dipstick.
2.
Using a long-neck funnel, add
enough fluid at the dipstick hole to
bring it to the proper level.
It doesn't take much fluid, generally less
than a pint
(0.5L). Don't
overfill. We
recommend you use only fluid labeled
DEXRONo-111 or DEXRONB-HE,
because fluids with that label are made
especially for your automatic transaxle.
Damage caused by fluid other than
DEXRONO-I11 or DEXRONB-IIE is not
covered by your new vehicle warranty.
After adding fluid, recheck the fluid
level as described under How
to
Check.
obtained, push the dipstick back in all
the
way.
When the correct fluid level is
2.2L L4: Adding Automatic Transaxle
Fluid
3.1
L V6: Adding Automatic Transaxle
Fluid

Advertisement

Table of Contents
loading

Table of Contents