Table of Contents
Advertisement
Easy-Enfry
Seaf
(RS 2-DOOR AND 2-24 MODELS)
The right front seat of your vehicle
makes it easy to get in and out of the
rear seat.
When you push down on the rear
latch and tilt the right front seatback
fully forward, the whole seat will slide
forward.
After someone gets into the rear seat
area, move the right front seatback to
its original position. Then move the
seat rearward until it locks.
To get out, again tilt the seatback fully
forward.
Splif Fold-Down Rear
Seaf
(OPTION)
To Open:
Pull forward on the seat tab.
To Close:
Push the seatback up to
its
original
position.
Push the seatback solidly up against the
back plate to ensure that the inertial
latch hooks.
Folding Rear
Seaf
(WAGON)
To add more cargo room, your rear
seatback can be easily folded down. Be
sure to check your seatback latches now
and then by pushing the seatback back
and forth. If they do not latch properly,
have them checked by your dealer.
Remember to keep safety belts clear of seat
hinges and latches so they are not damaged
when you raise and lower the seatback.
Advertisement
Table of Contents
