Table of Contents
Advertisement
ZP3 Fire Control Panel User Guide
LCD Display
Overview
ZP3 panels use a carefully structured reporting system for alarms, faults, and other events.
Information is displayed on a 160-character LCD Display as shown in Figure 10. The display has
two alarm screens; the Zone Screen, which shows alarms by zone, and the Point Screen, which
shows alarms by device. The zone screen displays automatically, and the point screen is
accessed manually. All events are prioritized and the system provides simple operation.
Figure 10: LCD Display - overview
Alarms by zone
Alarms are first displayed by zone, with a zone
message identifying the location. Two zones are
always visible, the 2
line shows the first alarm
nd
received, and the 3
rd
line shows the last alarm received.
Scrolling alarms
If the system has more than two zones in alarm, then
the More LED illuminates, and you can scroll through
alarms with using the scroll buttons. After scrolling, the
system reverts to the first and last alarms on-screen,
after a timeout (zone mode).
Alarms by device
Press View Points to see current alarms by device. The
device screen displays the exact address of the device,
and a message with its exact location.
Page 14
Revision 11 (05/01/2010)
Advertisement
Table of Contents
