Table of Contents
Advertisement
7-1. Phone operation (Hands-free system for cellular phones)
When there is no current call, but
there is a call on hold: "Activate"
is displayed. When selected, the
system switches to the call that
was on hold.
When there is another call on
hold during a call: "Swap calls" is
displayed. When selected, the
current call is placed on hold,
and the system switches to the
call that was on hold.
●
This function may not be available
depending on the type of cellular
phone.
Incoming call waiting
When a call is interrupted by a third
party while talking, the incoming
call screen is displayed.
1
Select "Answer" or press the
switch on the steering wheel to
start talking with the other party.
"Decline": Select to refuse to receive
the call.
■
Changing parties
1
Select "Swap calls".
Each time "Swap calls" is
selected during an interrupted
call, the party who is on hold will
be switched.
●
This function may not be available
depending on the type of cellular
phone.
YARIS_NAVIGATION AND MULTIMEDIA SYSTEM OWNER'S MANUAL_Europe_MK0019_en
®
Bluetooth
phone mes-
sage function
Received messages can be
forwarded from the connected
®
Bluetooth
phone, enabling
checking and replying using
the system.
Depending on the type of
®
Bluetooth
phone connected,
received messages may not be
transferred to the system.
If the phone does not support
the message function, this
function cannot be used.
Displaying the message
screen
1
Display the phone top screen.
(P.164)
2
Select "Message".
A confirmation message appears
when the "Automatic message
transfer" function is set to off
(P.187), select "Yes".
3
Check that the message screen
is displayed.
"Phone": Select to change to phone
mode.
The account name is displayed
on the left side of screen.
Account names are the names of
the accounts that exist on the
currently connected phone.
The following functions can be
175
7
Advertisement
Table of Contents
