Toyota YARIS 2020 Manual page 134

134
4-3. Media operation
be reached by the following meth-
ods: P.115
 Connecting a Miracast
(P.134)
Control screen
A Select to disconnect the Mira-
®
cast device.
B Select to change the screen
size. (P.117)
C Select to display the image qual-
ity adjustment screen. (P.117)
D Select to display/hide the control
button.
●
When "Access to network" (P.45) is
set to "On", Wi-Fi
tion communication and Miracast
communication may affect each other,
causing image distortion and audio
stuttering. If this occurs, setting
"Access to network" to "Off" may
reduce the effects.
●
The Miracast
into account the sound volume of both
the system and the connected device.
Before using Miracast
sound volume of the connected
device to an appropriate level.
●
When a device that uses Bluetooth
YARIS_NAVIGATION AND MULTIMEDIA SYSTEM OWNER'S MANUAL_Europe_MK0019_en
®
device
®
network connec-
®
®
sound volume takes
®
, adjust the
®
audio is used with Miracast
sound may be output from Miracast
If this occurs, disabling the Bluetooth
audio may allow sound to be output
®
from Miracast .
®
●
The Miracast screen displays the
same image that is sent from the
external device. If the external device
screen is vertically-oriented, the
screen may also display a vertical
image.
WARNING
●
Do not connect smartphone or
operate the controls while driving.
NOTICE
●
Do not leave your smartphone in
the vehicle. In particular, high tem-
peratures inside the vehicle may
damage the smartphone.
Connecting a Miracast
device
®
Miracast is available when the Wi-
®
Fi function is enabled. (P.45)
1 ®
Turn the Miracast
your smartphone on.
2
Select "Miracast™" on the audio
source selection screen.
(P.115)
 The system will automatically
start searching for a Miracast
compatible device.
®
, no
®
.
®
®
function of
®