Table of Contents
Advertisement
7-1. Phone operation (Hands-free system for cellular phones)
Placing a call using the
Bluetooth
system
After a Bluetooth
been registered, a call can be
made using the hands-free
system. There are several
methods by which a call can
be made, as described below.
Calling methods on the
Bluetooth
1
Display the phone top screen.
(P.164)
2
Select the desired method to
call from.
■
Calling methods from phone
screen
By call history (P.169)
By favourites (P.170)
By contacts (P.170)
By keypad (P.171)
By message (P.178)
■
Also the following lists are
available from each function's
screen
By POI call
By speech command system
(P.167)
*
SOS
(P.171)
By home screen (P.172)
*
: Models with navigation function
YARIS_NAVIGATION AND MULTIMEDIA SYSTEM OWNER'S MANUAL_Europe_MK0019_en
®
hands-free
®
phone has
®
phone
*
(P.74)
By call history
Up to 45 of the latest call history
items (missed, incoming and outgo-
ing) can be selected.
1
Display the phone top screen.
(P.164)
2
Select "History" and select the
desired contact.
If the contact which is not regis-
tered on the contact list is
selected, the name is displayed
as "Unknown contact". In this
case, select the number to make
a call properly.
3
Check that the dialing screen is
displayed.
●
The icons of call type are displayed.
: Missed call
: Incoming call
: Outgoing call
●
When making a call to the same num-
ber continuously, only the most recent
call is listed in call history.
●
When a phone number registered in
the contact list is received, the name
is displayed.
●
Number-withheld calls are also mem-
orized in the system.
●
International phone calls may not be
made depending on the type of
®
Bluetooth
phone you have.
●
The list should group together consec-
utive entries with the same phone
number and same call type. For
example, two calls from John's mobile
would be displayed as follows: John
(2)
169
7
Advertisement
Table of Contents
