Carrier bryant Multi-Zone 38MARBQ09 18AA3 Series Service Manual page 63

38MAQB18~30---3 Outdoor Unit
Inverter & Main PCB Removal (page 3 of 4)
Carefully lift up Inverter PCB off, guiding the
loose wires up and out at the same time.
Clean off old
Conductive Grease
and apply new before
reassembling. If this is
not done overheating
can occur.
For Sizes 18K, 24K, 30K
Factory Authorized Parts™
38AQ680001 Conductive
Grease
Some wires will be
reused if replacing
Inverter PCB.
Continued on next page