Table of Contents
Advertisement
Audio
Problem
Good picture, no sound
Audio noise
Cannot gain enough volume
when using a cable box
Sound seems weak or
insufficient
Cannot raise the volume on
external speakers
Channels
Problem
Cannot receive upper channels
(UHF) when using an antenna
TV is fixed to one channel
Cannot receive any channels
when using cable TV
Cannot receive or select
channels
Some digital cable channels are
not being displayed
Possible Remedies
s
Press
MUTING
so that
s
Make sure the
Speaker
s
(For KDE61XBR950 only) Make sure the
display unit is set to OFF.
s
Communication problems may occur if the infrared communication equipment
(e.g., infrared cordless headphones) is used near the TV. Please use headphones
other than infrared cordless headphones. Also, if you use the infrared
communication equipment other than infrared cordless headphones, move the
infrared transceiver away from the TV until the noise is eliminated, or move the
transmitter and receiver of the infrared communication equipment closer together.
s
Increase the volume of the cable box using the cable box's remote control. Then
press
FUNCTION
repeatedly until the TV indicator lights up and adjust the TV's
volume.
s
The TV's audio might be set to
Stereo. In the Audio Menu (see page 99), set the
already set to Stereo, switch to
during weak stereo broadcasts).
s
If the
Speaker
option is set to
order to output the sound to your audio system) use your audio receiver to adjust
the sound (see page 100). Or, to use the TV remote control, set the
option to Variable.
s
To turn on the TV speakers, set the
Possible Remedies
s
ANT
Press
to select the VHF/UHF input. (see page 50)
s
Auto Program
Use
in the Channel Menu to add receivable channels that are not
presently in the TV's memory (see page 103).
s
Auto Program
Use
in the Channel Menu to add receivable channels that are not
presently in the TV's memory (see page 103).
s
Channel Fix
Check your
s
Auto Program
Use
in the Channel Menu to add receivable channels that are not
presently in the TV's memory (see page 103).
s
ANT
Press
to select the CABLE input. (see page 50).
s
Use
Auto Program
in the Channel Menu to add receivable TV channels that are
not presently in TV memory (see page 103).
s
Certain cable companies have limitations on the broadcast of digital cable
channels. Check with your cable company for more information.
s
The digital cable channel may be set to
70).
Muting
disappears from the screen (see page 50).
option is set to
On
in the Audio Menu (see page 100).
EXT SP
Auto SAP
or Mono, when it might be better set to
MTS
Mono
(which may reduce background noise
Off
and the
Audio Out
Speaker
option to
settings (see page 103).
Hide
in the Digital Setup Menu (see page
switch at the rear of the
setting to Stereo. If
option is set to
Fixed
(in
Audio Out
On
(see page 100).
119
Advertisement
Table of Contents
