Table of Contents
Advertisement
z If
4:3 Default
is set to
anything but Off, the
Wide
Mode
setting changes only
for the current channel.
When you change
channels (or inputs),
Wide
Mode
is automatically
replaced with the
4:3
Default
setting. To retain
the current
Wide Mode
setting as channels and
inputs are changed, set
4:3 Default
to Off.
102
Option
Description
4:3 Default
Wide Zoom
Select the default
Screen Mode to
use for 4:3 sources
Normal
Full
Zoom
Off
Vertical Center
Allows you to move the position of the picture up and down in
the window. (Available only in Wide Zoom and Zoom modes.)
V
Press
and –15 (Zoom mode), and +5 and –5 (Wide Zoom mode).
Vertical Size
Allows you to adjust the vertical size of the picture. (Available
only in Wide Zoom and Zoom modes.)
V
Press
and –7.
Screen Saver
Orbit
All White
Select to enlarge the 4:3 size picture, while the
upper and lower parts of the picture are
condensed to fit the wide screen.
Select to return the 4:3 picture to normal mode.
Select to enlarge the 4:3 picture horizontally
only, to fill the wide screen.
Select to enlarge the 4:3 picture horizontally
and vertically to an equal aspect ratio that fills
the wide screen.
Select to continue using the current Wide Mode
setting when the channel or input is changed.
v
or
and press
to choose a correction between +15
v
or
and press
to choose a correction between +7
Moves the picture position to reduce image
retention. This does not prevent image retention
completely if the same picture is displayed for
an extended period of time.
Displays a white screen to reduce image
retention.
Advertisement
Table of Contents
