Table of Contents
Advertisement
Using the i.LINK Control Panel
The DTV window appears only if
the i.LINK menus were entered
while watching a digital TV channel
After you select an i.LINK device using the Device List, the TV displays the
i.LINK Control Panel, which allows you to use the TV's remote to control
the selected i.LINK device.
1
If the i.LINK Control Panel is not already displayed, press
remote control.
If i.LINK is pressed while the TV is displaying an analog or
digital channel (not the i.LINK device), then the Device List will
appear. Select the desired device from the list and press
display the Control Panel.
2
V v B b
Press
on the remote control to navigate through the options
available in the i.LINK Control Panel.
3
Press
to select a desired option.
4
EXIT
Press
to exit the Control Panel and view the i.LINK device full-
screen.
To exit i.LINK mode, select DTV from the Device List or press
CH+/-.
The i.LINK Control Panel displays the signal from the TV to the left (if
available), and the signal from the currently selected device to the right.
i.LINK
on the
to
91
Advertisement
Table of Contents
