Advertisement
Caution:
Use a UL/IEC/EN 60950-1 certified power supply
to connect to a DC converter, and #14 AWG wire to connect
to a DC PSU.
Attention:
Utilisez une alimentation certifiée UL/IEC/EN
60950-1 pour le connecter à un convertisseur CC et un câble
AWG #14 pour vous connecter à une alimentation CC.
4
Verify Switch Operation
1
1.
Verify basic switch operation by checking the system LEDs.When
operating normally, the PSU1/PSU2 and the DIAG LED should
all be on green.
5
Perform Initial Configuration
1.
At this point you may need to make a few basic switch
configuration changes before connecting to the network. It is
suggested to connect to the switch console port to perform this
task.
2.
The serial port's configuration requirements are as follows:
115200 bps, 8 characters, no parity, one stop bit, 8 data bits,
and no flow control.
3.
You can log in to the command-line interface (CLI) using default
settings: User "admin" with password "admin".
4.
For information on initial switch configuration, refer to the CLI
Reference Guide.
6
Connect Network Cables
1
1.
For the SFP/SFP+/QSFP+ slots, first install SFP/SFP+/QSFP+
transceivers and then connect fiber optic cabling to the
transceiver ports. The following transceivers are supported:
■
1000BASE-SX (ET4201-SX)
■
1000BASE-LX (ET4201-LX)
■
10GBASE-SR (ET5402-SR)
■
10GBASE-LR (ET5402-LR)
1
1
2
■
40GBASE-SR4 (ET6401-SR4)
■
40GBASE-LR4 (ET6401-LR4)
2.
As connections are made, check the port status LEDs to be sure
the links are valid:
■
On/Blinking Green — Port has a valid link. Blinking
indicates network activity
Hardware Specifications
Switch Chassis
Size (WxDxH)
ECS5520-18X:
43.8 x 28.0 x 4.3 cm (17.26 x 11.02 x 1.71 in.)
ECS5520-18T:
44.0 x 28.0 x 4.4 cm (17.32 x 11.02 x 1.73 in.)
Weight
ECS5520-18X: 3.9 kg (8.6 lb) with 1 PSU
ECS5520-18T: 4.1 kg (9.04 lb) with 1 PSU
Temperature
Operating: 0° C to 50° C (32° F to 122° F)
Storage: -40° C to 70° C (-40° F to 158° F)
Humidity
Operating: 5% to 95% (non-condensing)
AC PSU Power Specification
AC Input Power
100–240 VAC 50–60 Hz, 3–1.5 A
PSU Power Rating
150 W x 2 AC PSU
DC PSU Power Specification
DC Input Power
-36– -72 VDC, 6–3 A
PSU Power Rating
150 W x 2 DC PSU
Regulatory Compliances
Emissions
AS/NZS CISPR 32:2015
EN 61000-3-2: 2014, Class A
EN 61000-3-3: 2013
FCC, Class A
VCCI, Class A
CNS 13438
GB/T9254-2008
Immunity
EN55032: 2015/AC:2016
EN55024: 2010+A1: 2015
Safety
IEC 60950-1:2005+A1:2009+A2:2013
IEC 62368-1:2014
UL 62368-1, 2014-12-1, CAN/CSA C22.2
No.62368-1-14, 2014-12
BSMI Safety Standard CNS14336-1
GB4943.1-2011
Taiwan RoHS
CNS 15663
– 2 –
Quick Start Guide
Advertisement
