Using The Screen Settings; Selecting Screen Options - Sony KLV-S40A10 Operating Instructions Manual

Using the Screen Settings

To select the Screen settings
1. Press 2. Select
WEGA GATE Settings
WEGA GATE
To exit the Screen settings, press
Selecting Screen
Options
z To change from one Wide
Mode option to another,
use WIDE on the remote
control.
z For Wide Zoom and Zoom
modes, you can adjust the
vertical position of the
picture. For details, see
page 52.
z Normal, Full1 and Full2 are
available for Wide Mode
when PC input is selected.
z 4:3 Default functions only
when the TV receives 480i
or 480p signals.
z If 4:3 Default option is set
to anything but Off, the
Wide Mode setting
changes only for the
current channel. When you
change channels (or
inputs), Wide Mode is
automatically replaced with
the 4:3 Default setting for
4:3 sources. To retain the
current Wide Mode setting
as channels and inputs are
changed, set 4:3 Default to
Off.
3. Highlight 4. Press
Screen
WEGA GATE
.
The Screen settings includes the following options:
To highlight an option and to change settings, press VvB b.
Press to confirm the selection.
Option Description
Wide Mode Wide Zoom
Select a Wide
Mode to use for
Normal
4:3 sources
Full
Zoom
4:3 Default Wide Zoom
Select the default
Screen Mode to
use for 4:3
Normal
sources
Full
Zoom
Off
Not available for PC input.
Screen
Wide Mode:
4:3 Default:
Overscan:
V Center:
to select
H Center:
Phase:
Pitch:
Reset:
Select:
Select to enlarge to fill screen with minimum
distortion.
Select to display 4:3 picture in original size
when the original source is 4:3 (Standard
definition source).
Select to enlarge the original picture
horizontally to fill the screen when the original
source is 4:3 (Standard definition source). When
the original source is 16:9 (High definition
source), select this mode to display 16:9 picture
in original size.
Select to enlarge the original picture without
distorting the aspect ratio.
Select to enlarge the 4:3 picture to fill the 16:9
screen, keeping the original image as much as
possible.
Select to return the 4:3 picture to its original
size.
Select to enlarge the 4:3 picture horizontally
only, to fill the 16:9 screen.
Select to enlarge the 4:3 picture horizontally and
vertically to an equal aspect ratio that fills the
16:9 screen. Useful for watching Letterbox
movies.
Select to continue using the current Wide Screen
Mode setting when the channel or input is
changed.
Using the Settings
TV
Wide Zoom
Wide Zoom
Normal Wide Zoom
Normal
Full
Zoom 0
0
Set: Back: Exit:
WEGA GATE
(Continued)
51