Table of Contents
Advertisement
PI Operation Manual
2.6 SAFETY INSTRUCTIONS RELEVANT FOR MAINTENANCE, INSPECTION AND ASSEMBLY
WORK
It is the plant operator's responsibility to ensure that all maintenance, inspection and assembly work
is performed by authorized and qualified personnel who have adequately familiarized themselves with
the subject in matter by studying this manual in detail.
Any work on the machine shall only be performed when it is at a standstill. To shut off the machine
it is imperative to follow the procedure for shutting down the machine as described in SECTION
5.4-STOPPING.
Pumps and pump units that convey hazardous materials must be decontaminated before any
maintenance work is performed.
On completion of work all safety and protective facilities must be re-installed and made operative
again.
Prior to restarting the machine, follow the instructions listed under
2.7
UNAUTHORIZED ALTERATIONS AND SPARE PARTS
Modifications may be made to the machine only after consultation with a WDM Pumps representative.
Using spare parts and accessories authorized by WDM Pumps is in the interest of safety. The use of
parts not authorized by the dealer exempt the manufacturer from any liability, voiding the warranty.
2.8
UNAUTHORIZED MODES OF OPERATION
The reliability of the machine is guaranteed if and only if it is used in the intended manner, in accordance
with the statutes of this manual. The limit values specified in the data sheet must never be exceeded
under any circumstance.
SECTION 5.2-STARTUP
www.wdmpumps.com
.
9
Advertisement
Table of Contents
