Table of Contents
Advertisement
Self-Priming Pumps.
WARNING.
WDM is not responsible for any damage or accidents that
occur when the instructions given in this manual have not been
followed.
The warranty is only valid when using WDM original spare
parts. Failure to follow these guidelines in installing and starting your
pump will void your warranty.
2. Safety Recommendations.
•
WDM pumps are designed to operate safely when used and
maintained according to this manual.
•
Rotating parts of the pumps are dangerous and can cause
injury. Operators and maintenance personnel should be aware
of and follow safety recommendations.
•
The pumps are considered heavy equipment. Handle them with
care.
• To reduce the risk of electrical shock, all wiring of pumps,
motors, overload protection and control panels must be in
accordance with the National Electric Code (NEC) or the
Canadian Electrical Code (CEC) and all applicable state,
province, local codes and ordinances. Requirements will vary
depending on usage and location. Improper grounding will void
the warranty.
• To reduce risk of electrical shock, always disconnect the pump
from the power source before handling or servicing. Cable
should be inspected frequently.
• Never handle connected power cords with wet hands.
• If any product is to be returned, it must be cleaned, sanitized, or
decontaminated as necessary according to any applicable laws
and regulations prior to shipment, to protect employees from
exposure to health hazards.
• Bronze/brass and bronze/brass fitted pumps may contain lead
levels higher than considered safe for potable water systems.
Lead is known to cause cancer and birth defects or other
3
Advertisement
Table of Contents
