Table of Contents
Advertisement
PI Operation Manual
Figure 6.7 Inserting the bushing in the central bore of the adapter.
Do not force the insertion of the carbon bushing beyond the limit with the hy-
draulic press, as the bushing may be broken.
8. Place the corresponding gasket in the adapter; make sure to match the holes in the adapter. It
is recommended to grease the gasket once in place, in order to accomplish the next reassembly
step.
Figure 6.8 Placing the corresponding gasket over the adapter.
9.
Position the adapter in the casing, the shaft must pass through the central bore. Make sure
that the adapter´s ears are aligned with the suction side and the screwholes match.
29
www.wdmpumps.com
Advertisement
Table of Contents
