Table of Contents
Advertisement
PI Operation Manual
5.
Tighten the impeller screw into the shaft's impeller side.
6.
Placing the impeller-shaft assembly in the casing.
Space between impeller and casing
7.
Using a hydraulic press, insert the bushing in the central bore of the adapter, making sure it
is well positioned in the bottom of the adapter.
28
www.wdmpumps.com
Figure 6.5 Tightening the impeller screw into the shaft's impeller side.
Impeller resting on casing`s bottom
Figure 6.6 Placing the impeller-shaft assembly in the casing.
Advertisement
Table of Contents
