Running Initial Setup - Sony Bravia KDL-40BX450 Operating Instructions Manual

Running Initial Setup

During initial setup, you will perform the following:
• Set the language for the On Screen Display (OSD) text
• Choose your viewing environment
• Scan for digital and analog channels
Complete your cable connections before beginning the Initial Setup. Refer to the Quick
Setup Guide (supplied) for sample connection diagrams.
Initial Setup
Please select your language:
English
Español
Français
Confirm Confirm
Confirm Confirm
2
Use the remote control buttons described below to navigate through the Initial
Setup.
3
Auto Program will scan for available channels from the signal source directly
connected to the TV's CABLE/ANTENNA input. Follow the help text provided on the
screen to run the Auto Program.
• If you cancel the Auto Program, any channels you have selected are not registered. To rescan
for available channels, run Auto Program.
• Connect either your cable or antenna to the TV (you can connect both using an A-B RF switch
(not supplied)); for more details see page 12.
20
V/v/B/b buttons:
Allow you to navigate and highlight options where applicable.
button:
Allows you to select the highlighted option and advance to the next screen.
1
Turn on the TV.
The Initial Setup screen will appear.