6: Running Initial Setup - Sony BRAVIA XBR-55X855A Operating Instructions Manual

6: Running initial setup

1
Complete your cable connections before
proceeding with the Initial Setup.
Connect the TV to your nearest power outlet.
2
Press "/1 on the TV. The illumination LED
will light up in white.
When you switch on the TV for the first time,
the Language menu appears on the screen.
~
• When you turn on the TV for the first time, the
TV requires some internal processing for
optimization before you can perform the
initial setup. There will be no picture and
sound, and the illumination LED on the front
of the TV blinks white for about 40 seconds.
Do not turn off the TV during this process.
This process has been completed at the
factory for some TVs.
• The illumination LED lights up in different
colors according to the status of the TV. If
you do not wish to light up the illumination
LED, you can turn it off later. Press HOME,
then select Settings t Preferences t
Front Panel Illumination t Illumination
LED t Off. You can also press OPTIONS,
then select Illumination LED t Off.
3
Press V/v/B/b to select an item, then press
.
Follow the instructions on the screen.
~
• Home mode sets the TV to settings
optimized for home viewing.
4
Scan for available channels. If you receive
channels from a cable box or satellite
receiver and do not wish to use the TV's
built-in tuner, select Skip.
5
Set up the Internet settings. If you do not
access the Internet, or to set up later, select
Skip. After you select Continue or Start
(depending on model) at the Internet setup
confirmation screen, select Auto to connect
to the network automatically. Select Custom
to connect manually.
~
• If you use WEP security, select Custom t
Wireless Setup t Scan. Then, select the
network name (SSID) you want to connect. If
you cannot find the required network name,
select [Manual Entry] and press
network name.
• To set Network Setup later, press HOME,
then select Settings t Network t
Network Setup.
• Use the optional USB Wireless LAN Adapter
to connect with your wireless router (or
access point) at 5GHz. Insert USB Wireless
LAN Adapter and set Wi-Fi Direct to Off.
Press HOME, then select Settings t
Network t Wi-Fi Direct t Off.
to enter
19