Running Initial Setup - Sony BRAVIA KDL-32L5000 Operating Instruction

Running Initial Setup
During initial setup, you will perform the following:
• Set the language for the On Screen Display (OSD) text
• Choose your viewing environment
• Signal source connection check
• Scan for digital and analog channels
Complete your cable connections before beginning the Initial Setup. Refer to the Quick Setup
Guide (supplied) for sample connection diagrams.
1
Turn on the TV. The Initial Setup screen will
appear.
2
Use the remote control buttons described below to
navigate through the Initial Setup.
INPUT
wloe
_ _I,
+/+/+/+ buttons:
Allow you to navigate and highlight options where applicable.
o
button:
Allows you to select the highlighted option and advance to the next screen.
3
Auto Program will scan for available channels from the signal source directly connected to
the TV's CABLE/ANTENNA input. Follow the help text provided on the screen to run the
Auto Program.
• When prompted to select Retail
or
Home, be sure to select
Home for ENERGY STAR compliant mode.
• Select Cancel to stop or cancel the Auto Program. The Auto
Program can be done at later time. To run Auto Program at
later time, press MENU and select the Auto Program under
Channel settings.
• Connect either your cable or antenna to the TV (you can connect
both using an A-B RF switch (not supplied); for more details see
page 9.
• Select your preferred aspect ratio for the screen display. Press WIDE to select the Wide Mode or
press MENU and set the Auto Wide
to
On under the Screen settings; for more details, see page 23.
16