5: Bundling The Cables; 6: Running Initial Setup - Sony KDL-46HX820 Service Training Manual

~
Contact Sony Customer Support to obtain the
optional Support Belt Kit by providing your TV
model name.
• For United States call: 1-800-488-7669 or
visit: www.sony.com/accessories
• For Canada call: 1-877-899-7669
3
Anchor the TV to the Wall.
Anchor the TV to the wall by using bolts,
wall anchor and chain (or rope).
Anchor bolts (M6) (not supplied)
Wall-
mount
holes
~
• Your TV is shipped with screws attached to the
rear of the TV depending on the TV model.
(They are fastened in the screw holes for wall
mounting.) Be sure to remove the upper two
screws prior to anchoring the TV on a wall.
• Securing the TV to the stand without securing
the TV and the stand to the wall provides
minimum protection against the TV toppling
over. For further protection, be sure to follow
the three measures recommended.
16

5: Bundling the cables

~
• Before bundling the cables, remove the cable
holder from the AC cover (see step 1 and 2).
Reuse the cable holder (see step 3) to bundle
the other cables (see step 4).
• Do not bundle the AC power cord together
with other cables.
1 1
Rope or
chain
(not
supplied)
3 3
Wall-anchor
(not
supplied)
* When installing on the wall, attach the cable
holder under the terminals.

6: Running initial setup

1
Complete your cable connections
before proceeding with the Initial
Setup.
Connect the TV to your nearest
power outlet.
2 2
4 4
*