6: Running Initial Setup; Using A Wall-Mount Bracket - Sony KDL-40EX520 Service Manual

6: Running initial setup

1
Complete your cable connections
before proceeding with the Initial
Setup.
Connect the TV to your nearest
power outlet.
2
Press 1 (power) on the TV.
When you switch the TV on for the
first time, the Language menu
appears on the screen.
~
• When you turn on the TV for the first time, the
TV requires some internal processing for
optimization before you can perform the initial
setup. There will be no picture and sound, and
the timer indicator on the front of the TV
blinks orange for about 40 seconds. Do not turn
off the TV during this process.
3
Follow the instructions on the screen.
~
• Home mode sets the TV to settings optimized
for home viewing (this setting is ENERGY
STAR compliant).
14
4
Select Continue to scan for
available channels and enable the
Rovi On Screen Guide™ feature.
If you receive channels from a cable
box or satellite receiver and do not
wish to use the TV's built-in tuner,
select Skip.
Selecting Skip will disable the Rovi
On Screen Guide feature, which
is only available when the TV's
tuner is used.
~
• If you skip the channel scan while in the setup
menus, Rovi On Screen Guide will be disabled.
Using a Wall-Mount
Bracket
Your TV can be mounted on a wall using a
Wall-Mount Bracket (not supplied) out of
the box as packaged. If the Table-Top Stand
is attached to the TV, the TV may require
detaching the Table-Top Stand; see step 2
on page 8.
Prepare the TV for the Wall-Mount Bracket
before making cable connections.
For product protection and safety
reasons, Sony strongly recommends that
you use the Wall-Mount Bracket
designed for your TV and the installation
should be performed by a Sony dealer or
licensed contractor.
• Follow the instruction guide provided
with the Wall-Mount Bracket for your
model. Sufficient expertise is required in
installing this TV, especially to
determine the strength of the wall for
withstanding the TV's weight.