Event Log - Kidde AirSense Stratos Micra 25 Installer's Handbook

High sensitivity smoke detector
Table of Contents

Advertisement

8. Event Log

An event is defined as
The detector stores an internal log of the last 200 events, and this can either be viewed
on a PC screen or downloaded to disk by use of the remote control software.
When the event log is full (200 events are stored) and a new event occurs, the oldest
event in the log is deleted (First-In, First-Out).
To download the event log, connect a PC to the detector serial port and run the
remote software. Either select the menu options "View ' Event log" or click on the
event log symbol as indicated below.
The following screen appears:
Page 34
Stratos-Micra • INSTALLER'S HANDBOOK • Iss. 16
www.acornfiresecurity.com
a change to any programmed function
a signal received from an external controller such as the remote software, APIC or
SenseNET
a detector output level meeting or exceeding the Pre-Alarm, Aux, Fire 1 or Fire 2
alarm thresholds
a fault condition such as a flow or separator fault
start of day / night operation
demonstration mode start / stop
FastLearn start / stop
Power on or off
www.acornfiresecurity.com

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents