Advertisement
ASSOCIATION WITH THE GATEWAY
BEFORE FOLLOWING THE ASSOCIATION PROCEDURE, OPEN THE BLISS APP AND ADD A NEW DEVICE
With the display off, press the point
Press the point to access
The "humidity" section will be displayed
to turn the display on
the internal menu
as it is the first item in the menu.
Press on the right arrow to move on from
the RH section
Press the right arrow to keep
Press on the point to access
Press the point to put the thermostat
Visual confirmation of the correct association
scrolling through the menu
the device settings
into pairing mode.
is shown on the display
The opposing arrows will begin to flash
BLISS2 user manual -
6
Advertisement
