Advertisement
MANUAL MODE
With the display off, press the point
To change the target temperature,
With the target temperature showing,
To set the number of hours for which the manual mode is to
to turn the display on
press + or – on the main screen
confirm by pressing the point
apply (after which it will return to the AUTO (weekly) mode).
Press the + to increase the hours h01 = 1 hour, h02 = 2 hours, ...
Pressing the - until «h∞» is displayed will set the permanent
manual mode (until this is canceled via the App or thermostat.)
Confirm by pressing the center point
The arc will turn red if it is set on
With the display off, press the
The small top segment of the arc will show
heating or blue if it is on cooling
point to turn the display on
either red or blue, indicating respectively
that the heating or cooling system is active.
Press X to cancel Manual operation
and to return to AUTO operation
BLISS2 user manual -
2
Advertisement
