CONTENTS ENGLISH SAFETY PRECAUTIONS AND GENERAL INFORMATION ����������������������������������������������������������������������������������������������������������������� 4 DESCRIPTION ������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������ 6 CONNECTIONS ���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 7 HORIZONTAL MOUNTING WITH U BRACKET ���������������������������������������������������������������������������������������������������������������������������������� 8 VERTICAL MOUNTING WITH U BRACKET���������������������������������������������������������������������������������������������������������������������������������������� 9 MOUNTING WITH A SWIVEL BRACKET ����������������������������������������������������������������������������������������������������������������������������������������� 10 NOTES ABOUT LOW IMPEDANCE CONNECTIONS ������������������������������������������������������������������������������������������������������������������������ 11 ITALIANO AVVERTENZE PER LA SICUREZZA E INFORMAZIONI GENERALI �������������������������������������������������������������������������������������������������...
RCF S�p�A� will not assume any responsibility for the incorrect installation and / or 10. There are numerous mechanical and electrical factors to be considered when use of this product�...
Page 5
WARNING! CAUTION! For powered speakers, do cleaning only when the power is turned off. RCF S.p.A. reserves the right to make changes without prior notice to rectify any errors and / or omissions. Always refer to the latest version of the manual on...
This series covers 6 models� Models from M 06 to M 12 are equipped with a high power handling ‘Low Impedance Compensated Crossover’, having an electronic protection for the driver� The front grilles are made of steel and the front RCF logo is easily rotatable�...
3. CONNECTIONS Connect the positive wire (amplifier ‘+’ output) to the pin ‘INPUT +’ of the 4-pin EUROBLOCK connector� Connect the negative wire (amplifier ‘–’ output) to the pin ‘INPUT –’ of the 4-pin EUROBLOCK connector� The ‘LINK +’ and ‘LINK –’ pins are useful to link another loudspeaker in parallel� The impedance value of each loudspeaker is 8 Ω�...
5. VERTICAL MOUNTING WITH U BRACKET Necessary optional accessory: - VERTICAL BRACKET V-BR 2X COMPACT M 08 (for COMPACT M 08 model); - VERTICAL BRACKET V-BR 2X COMPACT M 10 (for COMPACT M 10 model); - VERTICAL BRACKET V-BR 2X COMPACT M 12 (for COMPACT M 12 model); Fix the U bracket to the wall / ceiling through at least 4 lateral wall plugs (max�...
6. MOUNTING WITH A SWIVEL BRACKET MOVING PART Necessary optional accessory: WALL MOUNT BRACKET SWM-BR COMPACT M (for COMPACT M 05, M 06 and M 08 models) FIXED PART 1� Install the fixed part of the accessory with 4 M8 wall plugs through the 4 holes (the central area of the fixed part can be useful to let pass the connecting cable from the wall outlet)�...
7. NOTES ABOUT LOW IMPEDANCE CONNECTIONS TOTAL IMPEDANCE: 8 Ω TOTAL IMPEDANCE: 4 Ω 8 Ω 8 Ω 8 Ω WARNING! CAUTION! - The total loudspeaker impedance must not be lower than the amplifier output impedance. Note: a loudspeaker total impedance equal to the amplifier output one permits to get the maximum deliverable power (but an higher loudspeaker impedance entails less power).
è ancorato il prodotto (parete, soffitto, struttura, ecc�) a dei componenti utilizzati Informazioni utili e rilevanti sull’argomento NOTE IMPORTANTI per il fissaggio (tasselli, viti, staffe non fornite da RCF ecc�) che devono garantire sicurezza del sistema / installazione nel tempo, anche considerando, ad esempio, le Informazioni riguardanti l’utilizzo di vibrazioni meccaniche normalmente generate dai trasduttori�...
Page 13
ATTENZIONE! CAUTELA! Per gli altoparlanti alimentati, eseguire la pulizia solo quando l’alimentazione è spenta. RCF S.p.A. si riserva il diritto di apportare modifiche senza preavviso per rettificare eventuali errori e/o omissioni. Fare sempre riferimento all’ultima versione del...
I modelli da M 06 e M 12 sono dotati di un crossover RCF compensato a bassa impedenza (“Low Impedance Compensated Crossover”) con protezione elettronica del driver� Le griglie frontali sono in acciaio con una robusta maglia a doppia rete di poliestere�...
3. COLLEGAMENTI Collegare il conduttore positivo (uscita “+” dell’amplificatore) al contatto “INPUT+” del connettore EUROBLOCK a 4 poli; collegare il conduttore negativo (uscita “–” dell’amplificatore) al contatto “INPUT – ” del connettore EUROBLOCK a 4 poli� I contatti “LINK +” e “LINK –” sono utilizzabili per un eventuale collegamento (in parallelo) di un altro diffusore acustico� L’impedenza di ciascun diffusore è...
4. INSTALLAZIONE IN POSIZIONE ORIZZONTALE TRAMITE STAFFA AD “U” Accessori opzionalI necessari: - STAFFA ORIZZONTALE H-BR 2X COMPACT M 08 (per il modello COMPACT M 08); - STAFFA ORIZZONTALE H-BR 2X COMPACT M 10 (per il modello COMPACT M 10); - STAFFA ORIZZONTALE H-BR 2X COMPACT M 12 (per il modello COMPACT M 12);...
5. INSTALLAZIONE IN POSIZIONE VERTICALE TRAMITE STAFFA AD “U” Accessori opzionali necessari: - STAFFA VERTICALE V-BR 2X COMPACT M 08 (per il modello COMPACT M 08); - STAFFA VERTICALE V-BR 2X COMPACT M 10 (per il modello COMPACT M 10); - STAFFA VERTICALE V-BR 2X COMPACT M 12 (per il modello COMPACT M 12);...
6. INSTALLAZIONE CON SUPPORTO ORIENTABILE Accessorio opzionale necessario: STAFFA A MURO SWM-BR COMPACT M (per i modelli PARTE MOBILE COMPACT M 05, M 06 e M 08) PARTE FISSA 1� Installare a parete la PARTE FISSA dell’accessorio tramite 4 tasselli M8 passanti per i 4 fori agli angoli (lo spazio centrale della parte fissa può...
7. NOTE SUI SISTEMI CON CONNESSIONE A BASSA IMPEDENZA TOTAL IMPEDANCE: 8 Ω TOTAL IMPEDANCE: 4 Ω 8 Ω 8 Ω 8 Ω ATTENZIONE! CAUTELA! - L’impedenza totale dei diffusori non deve essere inferiore a quella d’uscita dell’amplificatore; nota: l’impedenza complessiva dei diffusori uguale a quella d’uscita dell’amplificatore permette l’erogazione della massima potenza (mentre un’impedenza superiore comporta una riduzione della potenza erogata).
Need help?
Do you have a question about the Compact M Series and is the answer not in the manual?
Questions and answers